F065
Dirêjahiya Nominal a Boriya Derve:
- Ji aliyê Enterprise Standard of HL Cryogenic Equipment ve tê pêşniyarkirin. Her wiha dikare li gorî daxwaza xerîdar were hilberandin.
- Zexta Sêwiranê:
- Pêşniyarkirî ≤ 16 bar. An jî Cureyê Girêdana Qelandî (≤40 bar) hildibijêre.
- Materyalê Boriya Derveyî
Bêyî hewcedariyek taybetî, materyalê lûleya hundirîn û lûleya derve dê wekhev werin hilbijartin.
3.1.3 Cureyê Girêdana Qelandî
odel
Têkêlî
Awa
Diametera Nominal a Boriya Hundirîn
Zexta Sêwiranê
Mal
ji Boriya Hundirîn
Rêzan
Bingotin
W010
00X
Tîpa Girêdana Welded ji bo Lûleya Nerm a Îzolekirî ya Valahiya Statîk
DN10, 3/8"
8~40 bar
Pola Zengarnegir a Rêzeya 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Dirêjahiya Nominal a Boriya Derve: | |
| Zexta Sêwiranê | Materyalê Lûleya Hundirîn. | A 304 e, | DN40, 1-1/2" | C 316 e, |
| D 316L ye, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Zexta Sêwiranê |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Pêşniyarkirî ≤ DN25 an 1". An jî Cureyê Girêdana Bayoneta Vakumê bi Flanges û Boltan (ji DN10, 3/8" heta DN80, 3"), Cureyê Girêdana Qelandî (ji DN10, 3/8" heta DN150, 6") hildibijêre. | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Rêzan | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Dirêjahiya Nominal a Boriya Derve: |
| Ji aliyê Enterprise Standard of HL Cryogenic Equipment ve tê pêşniyarkirin. Her wiha dikare li gorî daxwaza xerîdar were hilberandin. | Materyalê Boriya Derveyî | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Awa | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Rêzan | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Zexta Sêwiranê. | / | DN25, 1" | DN25, 1" | / | |
| Materyalê Lûleya Hundirîn. | / | DN25, 1" | DN25, 1" | / | |
| C 316 e, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diametera Nominal a Boriya Hundirîn:
| Pêşniyarkirî ≤ DN25 an 1". An jî Cureyê Girêdana Bayoneta Vakumê bi Flanges û Boltan (ji DN10, 3/8" heta DN80, 3"), Cureyê Girêdana Qelandî (ji DN10, 3/8" heta DN150, 6") hildibijêre. | Dirêjahiya Nominal a Boriya Derve: |
| Ji aliyê Enterprise Standard of HL Cryogenic Equipment ve tê pêşniyarkirin. Her wiha dikare li gorî daxwaza xerîdar were hilberandin. | Zexta Sêwiranê: |
| Pêşniyarkirî ≤ 16 bar. An jî Cureyê Girêdana Qelandî (≤40 bar) hildibijêre. | Materyalê Boriya DerveyîBêyî hewcedariyek taybetî, materyalê lûleya hundirîn û lûleya derve dê wekhev werin hilbijartin.3.2 Sîstema Boriyên Îzolekirî yên Valahîya Dînamîk3/S |
| 3.2.1 Cureyê Girêdana Bayonetê ya Valahî bi Kelepçeyan | odel |
| Têkêlî | Awa |
| Diametera Nominal a Boriya Hundirîn | Zexta Sêwiranê |
| Mal | ji Boriya Hundirîn |
| Rêzan | Bingotin |
HDB01008
Cureyê Girêdana Bayoneta Valahîyê bi Kelepçeyan ji bo Lûleya Nerm a Îzolekirî ya Valahîya Dînamîk
lDN10, 3/8"
l8 bar
| Pola Zengarnegir a Rêzeya 300 C 316 e, | Materyalê Lûleya Hundirîn. | |
| A 304 e, | B 304L ye,C 316 e,D 316L ye, | |
| E yê din e. | HLH | DB01508 |
| DN15, 1/2" | Zexta Sêwiranê: | Zexta Sêwiranê: |
| DN20, 3/4" | Zexta Sêwiranê: | Zexta Sêwiranê: |
| DN25, 1" | Zexta Sêwiranê: | Zexta Sêwiranê: |
| Dirêjahiya Nominal a Boriya Derve: | Zexta Sêwiranê: | Zexta Sêwiranê: |
Pêşniyarkirî ≤ 8 bar. An jî Cureyê Girêdana Bayoneta Vakumê bi Flançe û Boltan (≤16 bar), Cureyê Girêdana Qelandî (≤40 bar) hildibijêre.Materyalê Boriya DerveyîBêyî hewcedariyek taybetî, materyalê lûleya hundirîn û lûleya derve dê wekhev werin hilbijartin.
Rewşa Hêzê:
HL-HX-X-Pêdivî ye ku cih hêzê bide pompên valahiyê û agahdariya elektrîkê ya herêmî (Voltaj û Hertz) bide HL Cryogenic Equipment.-00-X
3.2.2 Cureyê Girêdana Bayoneta Valahîyê bi Flançe û Boltan
odel
Têkêlî
Awa
Diametera Nominal a Boriya Hundirîn
Zexta Sêwiranê
Mal
ji Boriya Hundirîn
Rêzan
Bingotin
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Pola Zengarnegir a Rêzeya 300
Design Pressure
Zexta Sêwiranê.
08 8bar e,
16 16 bar e.
Materyalê Lûleya Hundirîn.
A 304 e,
B 304L ye,
C 316 e,
D 316L ye,
E yê din e.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Rêzeya Veqetandina Qonaxa Îzolekirî ya Valahîyê | DN10, 3/8" | Ermenî
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FransîDirêjahiya Nominal a Boriya Derve:X | DN15, 1/2" | |||||
| FransîPêşniyarkirî ≤ 16 bar. An jî Cureyê Girêdana Qelandî (≤40 bar) hildibijêre.X | DN20, 3/4" | |||||
| FransîRewşa Hêzê:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Îzlandî
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Fransî08 8bar e,00X | û 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FransîSamoayî00X | DN15, 1/2" | |||||
| FransîSindî00X | DN20, 3/4" | |||||
| FransîTacîkî00X | DN25, 1" | |||||
| FransîThayîkî00X | DN32, 1-1/4" | |||||
| FransîOzbekî00X | DN40, 1-1/2" | |||||
| FransîXhosayî00X | DN50, 2" | |||||
| FransîZulû00X | DN65, 2-1/2" | |||||
| FransîOriyayî00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Rewşa Hêzê:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Pola Zengarnegir a Rêzeya 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FransîDN15, 1/2"00X | DN15, 1/2" | |||||
| FransîDN20, 3/4"00X | DN20, 3/4" | |||||
| FransîDN25, 1"00X | DN25, 1" | |||||
| FransîW03200X | DN32, 1-1/4" | |||||
| FransîW04000X | DN40, 1-1/2" | |||||
| FransîW05000X | DN50, 2" | |||||
| FransîW06500X | DN65, 2-1/2" | |||||
| FransîW08000X | DN80, 3" | |||||
| HLûleya Çakêtê ya Valahîyê00X | DN100, 4" | |||||
| HÇînê Valvekirina Rêkxistina Herikîna Oxygen Liquid00X | DN125, 5" | |||||
| HBihayê firotanê ya Çînê Çînê ISO Standard Tank 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSîstema Pompaya Valahiyê ya Dînamîk00X | Rêzeya Veqetandina Qonaxa Îzolekirî ya Valahîyê | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FransîWhatsapp00X | DN15, 1/2" | |||||
| FransîWeChat00X | DN20, 3/4" | |||||
| FransîAlmanî00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Yewnanî
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Danîmarkî
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoyîX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Ermenî
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonîX | DN15, 1/2" | |||||
| HLHFrîzîX | DN20, 3/4" | |||||
| HLHGujaratîX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Îzlandî
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalamî00X | Maorîyî | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoayî00X | DN15, 1/2" | |||||
| HLHDSindî00X | DN20, 3/4" | |||||
| HLHDTacîkî00X | DN25, 1" | |||||
| HLHDThayîkî00X | DN32, 1-1/4" | |||||
| HLHDOzbekî00X | DN40, 1-1/2" | |||||
| HLHDXhosayî00X | DN50, 2" | |||||
| HLHDZulû00X | DN65, 2-1/2" | |||||
| HLHDOriyayî00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
